Spirit Doors Construction

 

Spirit doors Naturelle range


Naturelle and Primera range

These ranges can be constructed  in 3 different ways to suit your aesthetic requirements and the location of the product.

1. Joinery Door Panel Construction

A traditional mortice and tenon door with conventional stiles and rails. A ply panel has timber cladding applied to the face. The door can be made in softwood or hardwood.

2. Boarded Door Construction

For designs which do not require visible stiles and rails use a plycore with timber cladding.

For some types of timber it is necessary to limit the board width for both horizontal and vertical designs. This is necessary to reduce the risk of the timber splitting or curling with changing moisture content the door will have throughout the changing weather conditions.

For Oak and board the width would be 110mm

Hardwoods inc. Idigbo, Iroko, Sapele and Accoya the board width would be 140mm

3. Engraved Solid Core Door Blank

Edged all around, has the designs engraved into the face, a solid core paint finish and a selection of stain colours available.

Deco and Vision Range

These doors are constructed using plycore doors which are edged on all sides.  Where applicable, applied mouldings or engraving are used to create the design on the face of the door. Solid colour paint finish and limited stain colours are available.